Good to know - the different edge finishes

Here you will find more information on the subject of worktops and edging techniques. Since we take everything very seriously, we show you the differences here. All Häcker worktops are durable, long-lasting, easy to clean and give every kitchen a unique character.

Postformed 4cm
PVC edge 4cm
PVC edge 1,6cm
PVC edge 2,5cm

Back fitting with PVC edging the max. worktop depth changes:
worktop depth:
AP 132 max. 119 cm deep

Finish E = outside corners and inside corners squared
slanting cuts > 135° have rounded corners as standard.
Finish R = outside corners 20 mm radius
= inside corner connectors 30 mm radius

finished on both sides, decor finished on one side

Back fitting with PVC edging the max. worktop depth changes:
worktop depth:
AP 132 max. 119 cm deep

All corners are mitred.
Rounded edges are possible with a minimum radius of 40 mm.
Slanting cuts exceeding 135° have rounded corners as standard.

finished on both sides, decor finished on one side

Construction of worktops with PVC edging 1.6 cm thick
The worktops consist of full HDF-panels (material thickness 1.6 mm) and two-side laminate edging surface colour. If you have cut-outs for sinks and hobs, the built-in set has to be ordered in principle.

Please note:
Except for black steel, putty concrete and brushed steel the
bottom side is white.

finished on both sides, decor finished on one side

Breakfast bar

Breakfast bar 5 cm thick
finished on both sides
edges on 4 sides
with prefabricated connection on one side
max. capacity 20 kg/m2

per 10 cm
max. length 250 cm

Surcharge for
additional prefabricated connection
for freestanding planning
Please note:
For freestanding plannings
additional breakfast bar supports have to be used
either with or without working door, or in conjunction
with an open shelf corner filler.
(SO323/TT130/TT230)

Table top

Table top movable 8 cm thick
moves for 30 cm vertically
with locking mechanism
to be fitted onto a worktop which rests full-faced on base units
full-faced on base units
finished on both sides, edges on 4 sides

for laminate worktops thickness > 25 mm
incl. slide fittings, installation guide and
drilling template for worktops provided by the customer.

max. capacity 50 kg/m2

width: min. 60 cm/max. 200 cm
depth: min. 60 cm/max. 100 cm

For the planning of base units with this table top,
the tilt protection Z 791
is compulsory.

exact dimensions are necessary
please give the direction of movement